Microcontrollers & boards
120.000 ₫
A development board built on the ESP32-WROOM-32 module, with a dual-core 240 MHz processor and built-in Wi-Fi and Bluetooth. It is the most popular way to start an IoT project: read sensors, switch relays, and send data to your phone or a server. Program it with Arduino IDE, MicroPython or ESP-IDF, plug it straight into a breadboard and upload code over USB-C without a separate programmer.
Note: GPIO pins run at 3.3V. Do not feed 5V signals directly into the I/O pins.
| Module | ESP32-WROOM-32 |
|---|---|
| CPU | dual-core Xtensa LX6, up to 240 MHz |
| Memory | 520 KB SRAM, 4 MB flash |
| Wireless | Wi-Fi 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 + BLE |
| USB chip | CP2102, USB-C port |
| Pins | 38 (about 30 usable GPIO) |
| Logic level | 3.3V; 5V supply via USB or VIN |
| Size | about 55 × 28 mm |
Microcontrollers & boards
135.000 ₫
Learning kits
690.000 ₫
790.000 ₫
Sensors & modules
350.000 ₫
Sensors & modules
25.000 ₫